With pinball making a huge resurgence throughout the nation, Gentle Giant wishes to ensure that these timeless, beautiful machines remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.
Initially look, pinball makers can appear intimidating to move since of their fragility, size, and weight. Thankfully, our experienced Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox
The majority of modern pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball machines had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs utilize this system, in addition to the early Solid State machines.
Later makers have hinges and utilize a locking system to keep the headbox upright. There may also be two bolts inside as included security, in case the lock is broken or accidentally un-latched.
For Electro-Mechanical pinball machines, you need to eliminate the headbox rear gain access to panel to get to the bolts and plugs inside. Typically this panel has a lock on it to keep it in place, however gradually the secret might have been lost. On a regular basis, there is a screw keeping this panel in place.
When within, get rid of the bolts and disconnect the large connectors that have electrical wiring decreasing into the maker. You might wish to label these connectors to put them back in the best area, however they need to be different sizes, making it difficult to plug back incorrectly.
You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs
For early Solid State Pinballs, you will need to eliminate the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.
When opened, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.
Then, open the back box lamp panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise up the light panel in order to swing it open.
Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the maker. You might wish to label these plugs to put them back in the right spot. You may not have to eliminate the plugs, as the electrical wiring ought to be long enough to enable the headbox to be folded down.
At this moment, you can secure the light panel and change the back glass.
Modern Strong State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at More about the author the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and needs no tools.
You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise help keep the back glass in location.
You need to get inside if you can not fold the head box down. There is a lock located at the top of the back glass in the center. Use the supplied key to unlock, and remove the back glass by lifting it up from the bottom, and then pulling it out from the bottom.
Next, you will need to remove the display panel. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
Remove the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.
Pinball Device legs are held in place by eight bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.
But these captive nuts and threaded plates can be damaged, and using additional nuts might have been needed. If this is the case, you will need to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.
With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Slide out the playfield glass, and put in a safe place. Next, lift up the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.
You must now have access to any nuts that might have been used. When any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.
Be sure to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to fit.
Packing the Pinball.
You are now prepared to transport your pinball machine. Before you fill it, make certain you get rid of the pinballs so they do not bounce around throughout transport.
If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to loading the maker. Get a pal to help and have one of you supporting the pinball, while the other removes the front legs.
Make certain you strap the pinball in, as you do not desire it moving if you have to stop suddenly!
For Electro-Mechanical pinball machines, you require to get rid of the headbox rear access panel to gain access to the bolts and plugs inside. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to filling the maker. Grab a buddy to help and have one of you supporting the pinball, while the other eliminates the front legs.